18
User Manual – Gigabit PoE Supply NPS-30W | BDA 579 V2 2020/06
After Operation
6 After Operation
6.1 Dismounting devices
T
Disconnect the devices.
6.2 Transporting
T
Always transport devices and accessories in their original packaging.
6.3 Storage
T
If devices are not used for a longer period:
Disconnect the device from the connected devices.
T
Always store devices in a clean, dry location.
T
Always protect devices from dirt, dust, heat, humidity and moisture.
6.4 Cleaning and care
w
NOTE
Danger of property damage due to improper cleaning!
T
Disconnect device from all connections before cleaning.
T
Never immerse device or accessory in water under any circumstances.
T
Never spray device or accessory with liquids under any circumstances.
T
Wipe the surfaces of the device and accessory with a soft cloth slightly moistened with a mild
soap solution.
T
Never use aggressive, solvent-based or abrasive cleaning agents under any circumstances.
T
Never use rough materials (e.g., cleaning cloths or sponges with a rough coating).
6.5 Maintenance and repair
The Gigabit PoE Supply does not contain any parts that can be maintained or repaired by the user.
T
Only have the Gigabit PoE Supply repaired by a specialist dealer authorized by Neutrik.
T
Check the Gigabit PoE Supply regularly for visible damage to the housings, controls,
connections, cables and plugs.
T
If damage is detected, do not use device under any circumstances.
T
Immediately decommission the damaged device.
T
Replace defective cables or accessories immediately.