NEUTRIK NA2-IO-DLINE Скачать руководство пользователя страница 7

7

User manual – Dante

TM

 adapter NA2-IO-DLINE | BDA 537-V2 2018/12

Safety

 

w

NOTICE

Changes or modifications made to this equipment not expressly approved by Neutrik may void 
the FCC authorization to operate this equipment.

2.3.1 Declaration of conformity

The device meets all the relevant EU directives and therefore has the CE marking. The Declaration of 
Conformity may be consulted at www.neutrik.com/en/approvals-and-certificates.

2.4 Important safety instructions

Avoid property damage to the Dante

TM

 adapter due to unsuitable operating and environmental con-

ditions:

 

Never immerse in water.

 

Protect from strong sunlight.

 

Never install the device near heat sources such as radiators, heating units, ovens or stoves.

 

Never cover the device, to avoid overheating.

 

Protect the device from impact and above all, from falling from poles, stages, tables or furniture.

Repair

 

w

NOTICE

Property damage due to improper repair!

The Dante

TM

 adapter does not contain any parts which you can repair yourself. Opening or repair-

ing the devices on your own can lead to severe damage to the device.

 

T

Do not open the housing of the Dante

TM

 adapter under any circumstances.

 

T

Do not exchange any parts yourself.

 

T

Only have the Dante

TM 

adapter repaired by a authorized specialist dealer.

Information for operation

 

T

Ensure that the ambient conditions specified for the Dante

TM

 adapter are observed during 

operation.

 

T

Do not use the Dante

TM

 adapter if it is not functioning properly, have fallen or been damaged, 

have become wet or if parts of it have been immersed in water.

 

T

If disruptions occur during operation: 
Immediately disconnect the Dante

TM

 adapter from audio sources and/or audio sinks.

 

T

Do not operate the Dante

TM

 adapter in environments where flammable or explosive materials, 

gases or vapors are present or could occur.

2.5 Intended use

The Dante

TM

 adapter is designed for converting the signal of an analog LINE audio signal into a Dan-

te

TM

 signal. Dante

TM

 signals can also be converted into analog LINE signals.

2.6 Foreseeable improper use

The Dante

TM

 adapter is not suitable for use outdoors and in potentially explosive atmospheres.

Содержание NA2-IO-DLINE





















Отзывы: