Neutral X-DREi, Руководство пользователя

Страница: 8 / 20

X-
DREI
<7>
Recommended connection
The usual and recommended way to connect the X-DREI in your current stereo system is as
shown in the illustration above.
The X-DREI is inserted between the preamplifier and amplifier. In this mode with a single
appliance, the X-DREI serves all the sources used.
At the input you can connect any preamp of any brand, transistor or valve, or any source
(CD player, DAC, etc.) but it is very important that it has VOLUME CONTROL.
Remember that this device does not have any gain or volume control, so the volume level of
the output is the same as the input. If you connect a source directly, the sound is very
loud and could damage your speakers.
Output to amplifier
You should connect the output marked "OUTPUTS" directly to the respective amplifier and
can use any unbalanced connections (RCA) or balanced (XLR), since both are always
active and deliver the same signal.