6
www.neutonpower.com
Chapter 3: Operating Your NEUTON Battery-Powered Blower
Starting the Blower
•
Starting, stopping, and restarting an electric Motor repeatedly within a few seconds can generate a great deal of heat and damage the
Motor. To protect the life of your NEUTON Battery-Powered Blower, always wait at least five (5) seconds after stopping before restarting
the Blower.
•
Avoid collisions with hard objects, which could damage the Blower Tube.
1. Perform the Daily Checks listed on the back cover of this manual.
2. While firmly grasping the Handle, push the paddle ON/OFF Switch Button to the ON position (right side). If the Blower does not
start, make sure the Battery Pack is charged and locked firmly into place in the Blower Housing.
Using the Blower
Be careful where you point the jet of air from the Blower as it could move heavy material and cause injury or damage.
Use your NEUTON Battery-Powered Blower to clean out corners, fences, and walls, beneath cars or wooded areas.
Flip the paddle ON/OFF Switch to the ON position (right side), point the jet of air in front of you and move forward slowly to gather together
the material or to move the material from inaccessible areas.
TIP:
Swing the Blower Nozzle from side to side and circle the material you want to move.
Stopping Blower
Simply flip the paddle ON/OFF Switch to the OFF position (left side).
Chapter 4: Troubleshooting Your NEUTON Battery-Powered Blower
Troubleshooting Tips
Most difficulties are easy to fix. Consult the Troubleshooting Table on page 7 for common problems and their solutions. If you continue to
experience problems or need repairs beyond these minor adjustments, visit our website at
www.neutonpower.com
or call Neuton Power
Equipment Toll Free at:
1-866-NEUTON1 (638-8661)
for assistance.
Always remove the Battery Pack before performing any adjustments, maintenance, or repairs to your Blower.
Figure 2
Figure 3
Latch (1 on each side)
Battery Pack
Charger
Green LED
Paddle ON/OFF Switch
Red LED