Neurotech kneehab, Инструкция по эксплуатации

Страница: 16 / 24

S
TEP-B
Y
-
S
TEP TREA
TMENT GUIDE
16
Step 4 – Finishing Treatment & Storage
The treatment session is completed when the counter reaches zero. The unit will beep to indicate this.
Switch the unit off by pressing the On/ Off button for 3 seconds. Should you forget to do this, the unit
will switch off automatically after 20 seconds anyway.
Disconnect the unit from the garment by pressing the buttons on either side of the connector and
pulling the two sections apart (Fig. a).
Remove the garment by carefully peeling the electrodes off your leg. Ensure that the electrodes
remain attached to the garment. Place the garment on a flat surface with the electrodes facing
upward and replace the liners on the
black
side of each one. If the electrodes have lifted from the
garment, press the edges back into position.
Close the straps on the garment, ensuring that the electrodes all remain flat. Store the garment, with
the electrodes still attached, on a flat surface in a cool dry place.
Fig. a