NeuroNexus SmartBox Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 49

NeuroNexus SmartBox Скачать руководство пользователя страница 13

NeuroNexus Technologies, Inc. ©2014

| 655 Fairfield Court, Suite 100, Ann Arbor, Michigan USA

Telephone: +1.734.913.8858 | Fax: +1.734.786.0069 |

[email protected]

SOFTWARE

3.6 V

3.2 V
2.9 V

FIG. 20: Auxiliary channels associated with each SmartProbe

™

: 3 auxiliary analog inputs and a supply voltage (VDD) indicator.

number; in this case, amplifier channel 2 from Port A. Each channel may be named by the user by selecting the desired channel and clicking “Rename
Channel”; this custom channel name appears in the upper-right corner of the plot (e.g., “tetrode-4C”).

Channels may be reordered in the main interface window by dragging and dropping with the mouse. Menu commands allow users to restore channels
to their original order (i.e., A-001, A-002, A-003…) or to place them in alphabetical order by custom channel name. Unused channels may be disabled
by clicking on the appropriate button or pressing the space bar. When a channel is disabled, its time scale label is replaced by the word “DISABLED.”
Disabled channels are not plotted, and are not saved to disk. Users are encouraged to disable all unwanted channels to save disk space when record-
ing data.

Scrolling down to the bottom of the Port A waveforms using the cursor keys or the mouse wheel reveals four extra channels: three auxiliary analog in-
puts (“auxin1,” “auxin2,” and “auxin3”) to each SmartProbe

™

or SmartLink

™

headstage that are recorded at 1/4 the amplifier sample rate, and the supply

voltage that is recorded at 1/60 of the amplifier sample rate. As shown below, the range of each auxiliary analog input ranges from 0 to 2.5V.

The supply voltage (VDD) indicator has gray horizontal lines indicating three important voltage levels: 2.9V, 3.2V, and 3.6V.

The supply voltage must

remain below 3.6V or the chip can be damaged.

A supply voltage between 3.2V and 3.6V is required for normal operation. A supply voltage be-

tween 2.9V and 3.2V can be used for derated performance. Voltages below 2.9V are not recommended for proper SmartProbe

™

or SmartLink

™

opera-

tion. It is important to check the supply voltage if very long interface cables are used, as power line resistance can cause significant voltage drops. The
supply voltage trace is plotted in green if normal operation is maintained. A yellow trace indicates derated (~3.0V) operation, and a red trace indicates
over- or under-voltage conditions.

p.13

«
...
11
12
13
14
15
...
»

Содержание SmartBox


















































Отзывы:

Нет отзывов