Revision 1.3
HS-xx mux User’s Manual
6/29/2017
Page 24
-SendLynxSXCommand <Hardware Sub System Name> -DHSSetImpedanceMeasureEnabled <Headstage>
<Value>
Enables or disables the internal Electrode Impedance Measurement Circuitry on the HS-XX Digital.
Example:
-SendLynxSXCommand AcqSystem1 –DHSSetImpedanceMeasureEnabled 2 1
Default:
The internal Electrode Impedance Measurement Circuitry is by default disabled.
Usage:
This Command can be used after the Digital Lynx SX Hardware Sub System has been created.
Arguments:
Hardware Subsystem Name
Name of sub system that will be controlled.
Headstage
This value can be one of the following keywords:
1
: Selects multiplexing headstage 1 as the command target.
2
: Selects multiplexing headstage 2 as the command target.
Value
This value can be one of the following keywords:
1
: Enables the internal Electrode Impedance Measurement Circuitry.
0
: Disables the internal Electrode Impedance Measurement Circuitry.
Figure 6-2 DHSSetImpedanceMeasureEnabled Command Syntax
