manualshive.com logo in svg

Neural DSP Quad Cortex, Руководство пользователя

Поделиться
Скачать
Neural DSP Quad Cortex Скачать руководство пользователя страница 50

50

Modes

In the first example, 

Scene A (Footswitch A)

 bypasses the 

compressor, drive, and reverb blocks for a dry rhythm tone.  

Scene B (Footswitch B)

 toggles the compressor and drive but 

leaves the reverb pedal bypassed. 

Scene C (Footswitch C)

 

engages all the blocks in the row for a soaring lead guitar tone. 

The parameters within each virtual device can also be changed in 
each Scene.

The footswitch LEDs will illuminate according to the selected 
Scene. Eight scenes are available for each Preset.

Footswitch LEDs

While using Scene mode, 

press

 the 

Up

 and 

Down

 

footswitches

 to 

navigate through Presets. 

Press and hold either the 

Up

 or 

Down footswitch

 to navigate 

through banks. The Preset name and active footswitch will also 
blink intermittently. To confirm the change, press the blinking 
footswitch.

Navigating through Presets

Scenes can be copied and pasted into different footswitches via 
the main menu on The Grid. This action can be performed in any 
mode.

If you want to cancel the whole operation, tap the CANCEL button.

Copy & Paste Scenes

Scenes can be swapped via the main menu on The Grid. This 
action can be performed n any mode.

If you want to cancel the whole operation, tap the CANCEL button.

Swap Scenes

Содержание Quad Cortex























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды