Neunaber WET REVERB v5, Руководство пользователя

Страница: 3 / 4

PRIMARY CONTROLS
MIX
The Mix knob controls the mix between the dry signal and reverb:
• Full counter-clockwise is 100% dry
• Full clockwise is 100% reverb
• Approximately 3 o’clock is an even mix: half dry/half wet
TONE
The Tone knob controls the tone of the reverb only. The dry signal is not affected. Counter-clockwise is
darker; clockwise is brighter.
DEPTH
The Depth knob controls the length of the reverb tail; or in other words, the size of the acoustic space.
ALTERNATE CONTROLS
These controls are accessed by holding down the Engage footswitch while turning the knob.
EFFECT
The Effect control switches between the popular original Wet™ algorithm and the new W3T™ algorithm (the
same as the algorithm on the Immerse Mk II).
Effect LED color Knob direction
Original Wet blue counter-clockwise
New W3T green clockwise
TRAILS
The bypassed signal may be selected to have trails or not. When Trails is on, the effect signal trails off
naturally after the pedal is bypassed. When off, the effect cuts off immediately when the pedal is bypassed.
The LED will momentarily change color to indicate which bypass mode is selected.
Bypass Mode LED color Knob direction
Trails off magenta counter-clockwise
Trails on cyan clockwise