Neunaber IMMERSE REVERBERATOR MK II, Руководство пользователя

Страница: 6 / 16

CONNECTIONS
The Power Jack accepts a standard (5.5 mm OD x 2.1 mm ID) center-negative
pedal power adapter (not included). The power adapter must be between 9 V and
12 V and capable of supplying 80 mA or more.
The Input Jacks accept inputs directly from your instrument, amplifier effects
loop send, or other effect pedals via standard 1/4” (6.35 mm) phone connectors.
Inputs 1 and 2 should not be used with two discrete signals, such as two different
instruments.
The Output Jacks supply output to another effect pedal, an amplifier, or effects
loop return via standard 1/4” (6.35 mm) phone connectors. The output is buffered
and capable of driving long cables.
SWITCHES
The Footswitch engages the effect, and the LED lights when the effect is active.
There are two mini-switches next to the Power jack:
• Kill Dry removes the dry signal, even when bypassed. This should be enabled
for parallel effect loops and disabled for serial (common) effect loops.
• Trails allows the effect to naturally trail after the pedal is bypassed. With
normal bypassing, the effect is abruptly cut off; however, normal bypassing
results in lower noise while the pedal is bypassed.