14
| KH 805
Connecting/disconnecting the subwoofer
to/from the mains power supply
To connect the KH 805 to the mains power supply:
X
Make sure that the switch MAINS POWER
5
is set to “OFF” .
X
Make sure that the switch MAINS VOLTAGE SELECTION
4
is set to the correct position:
“AC 100/120 V” if your mains voltage is 100 V or 120 V or
“AC 220/240 V” if your mains voltage is 220 V, 230 V or 240 V .
X
Connect the IEC connector of the supplied mains cable to the IEC mains socket
7
.
Power Source
4
5
7
X
Connect the mains plug of the mains cable to a suitable wall socket .
To disconnect the KH 805 from the mains power supply:
X
Set the switch MAINS POWER
5
t
o “OFF” .
X
Pull the mains plug out of the wall socket .
Mounting the subwoofer electronics externally
If you distribute the subwoofers around the room but wish to have centralized access to the
operating controls of the subwoofer electronics or if you set up your subwoofers so that easy
access to the subwoofer electronics is not possible, you can mount the latter externally:
X
Use the Neumann REK 3 remote electronics kit together with an SC cable (available in differ-
ent lengths, see “Accessories” on page 24) .
X
Proceed as described in the operating manual of the REK 3 .
