Putting on
Press the switch (n°2 on picture), the machine is on. The electronic thermostat pre-
set in factory (n°1 on picture) displays the temperature.
Press the switch (n°3 on picture) to turn on ventilation
Temperature setting
Press “set” touch until the programmed value flashes (display of the temperature pre-
set in factory).
If you want to reduce the temperature, press on the flake symbol (n°1) until arriving
on the desired temperature. Then press “set” touch to validate the new value
If you want to raise the temperature, press on the off symbol (n°2) until arriving on
the desired temperature. Then press “set” touch to validate the new value
The thermostat comes back automatically on temperature display mode.
Stopping the appliance
Press both switches (n°2 and 3 on picture) on 0 : the machine is completely off
Let the appliance cool down
Disconnect the appliance
Clean the equipment. (See 6 cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
1
2
