NEULOG WIFI COMMUNICATION MODULE GUIDE
To enter USB Mode:
1.
Download and install the NeuLog software
) onto the computer which
you plan on using.
2.
Connect the WiFi module to the computer with the NeuLog software using
the included USB to micro USB cable, you
’ll see the LED lights blink for a
moment while the module powers on.
3.
Connect your NeuLog sensors to the side of the WiFi module, the red LED
on each sensor should blink to acknowledge they are working properly.
4.
Press the button located on the front panel of the WiFi module three times,
the yellow LED labeled
‘U’ should turn on.
5.
Open the NeuLog software.
Note:
The software will run through your
default browser but requires no internet connection.
6.
Your connected sensors will automatically be detected.
7.
Once your sensors are detected, you can begin experimenting in USB
mode!
Note:
To switch back to Access Point mode from USB mode, press the button on the
WiFi module faceplate three times again.
Included in package:
NeuLog WIFI-201 module
NeuLog WIFI-201 module instruction manual (this document).
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
After use, gently wipe away any foreign material from the RF module
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship for a
period of 3 years from the date of purchase. Our warranty does not cover damage of
the product caused by improper use, abuse, or incorrect storage. Sensors with a shelf
life such as ion selective proves have a warranty of 1 year. Should you need to act
upon the warranty please contact your distributor. Your sensor will be repaired or
replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W:
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536