NEULOG AMMONIUM LOGGER SENSOR GUIDE
Technical background:
The philosophy behind NeuLog’s plug and play technology is based on each sensor’s
ability to store its own data due to an internal flash memory chip and micro-controller
in each plastic NeuLog body. This technology allows the sensor to collect and then
store the digital data in the correct scientific units (
o
C,
o
F, Lux, %, ppm, for example).
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
The ammonium sensor uses a permanently filled ion selective electrode to accurately
measure the amount of ammonium ion in a solution.
The Ionic Strength Adjustor (ISA) is used to standardize the strength of the ions in
various solutions to give the most accurate readings.
Maintenance and storage:
Before use, please review the “Ammonium sensor usage”, “Electrode preparation”,
“Electrode storage”, and “Offsetting the sensor” sections of this document above to
ensure the proper storage and longevity of the NeuLog ammonium ion sensor.
Never submerge the NeuLog plastic body in any liquid
Do not allow liquid into the ammonium sensor’s body
After use, gently wipe away any foreign material from the ammonium sensor
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship. The
warranty is for a period of 3 years from the date of purchase and does not cover
damage of the product caused by improper use, abuse, or incorrect storage. Sensors
with a shelf life such as ion selective probes have a warranty of 1 year. Should you
need to act upon the warranty, please contact your distributor. Your sensor will be
repaired or replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W:
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V11042014