background image

Your appliance incorporates a recirculation system
which allows an optimal use of the concentrated deter-
gent.
Follow the product manufacturer’s recommendations
on quantities to use and do 

not exceed the «MAX»

mark in the detergent dispenser drawer

.

Quantity of detergent to be used

The type and quantity of detergent will depend on the
type of fabric, load size, degree of soiling and hardness
of the water used.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:

• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.

Degrees of water hardness

Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply
company, or from your local authority. If the water
hardness degree is medium or high we suggest you to
add a water softener following always the manufactur-
er’s instructions. When the degree of hardness is soft,
readjust the quantity of the detergent.

First use

• Ensure that the electrical and water connec-

tions comply with the installation instructions.

• Remove the polystyrene block and any materi-

al from the drum.

• Pour 2 litres of water into the main wash com-

partment   of the detergent drawer in order

to activate the 

ECO

 valve. Then run a cotton

cycle at the highest temperature without any
laundry in the machine, to remove any manu-
facturing residue from the drum and tub. Pour
1/2 a measure of detergent into the main wash
compartment and start the machine.

Daily use

Load the laundry

Open the door by care-
fully pulling the door han-
dle outwards. Place the
laundry in the drum, one
item at a time, shaking
them out as much as
possible. Close the door.

Make sure that no laun-
dry stays between the
seal and the door. There
is a risk of water leakage
or damage to the laun-
dry. 

Measure out the detergent and the fabric softener

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
main wash compartment 

 or in the appropriate

compartment if the selected programme/option it re-
quires (see more details in "Detergent dispenser
drawer").
If required, pour fabric softener into the compartment
marked   (the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gen-
tly.

 

11

Содержание IWM 601 W





























Отзывы: