Neue IDSH604W, Руководство пользователя

Страница: 9 / 20

5. Turn the cap of the salt container clockwise to
close the salt container.
Caution! Water and salt can come out of
the salt container when you fill it. After
you fill the salt container, immediately
start a programme to prevent corrosion.
How to fill the rinse aid dispenser
M AX
1
2
3
4
+ -
A B
D
C
E
Caution! Only use rinse aid specifically
designed for dishwashers.
1. Press the release button (D) to open the lid (C).
2. Pour the rinse aid in the dispenser (A) until the
liquid reaches the fill level 'max'.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent too much foam.
4. Close the lid. Make sure that the release button
locks into position.
Fill the rinse aid dispenser when the
indicator (E) becomes clear.
You can turn the selector of the released
quantity (B) between position 1 (lowest
quantity) and position 4 or 6 (highest
quantity).
Daily use
1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in programme selection
mode.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and the degree of soil.
Using the detergent
20
30
B A D
C
1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (A).
3. If the programme has a prewash phase, put a small
quantity of detergent in the compartment (D).
4. Close the lid. Make sure that the release button
locks into position.
9