NEU MASTER NTC0023-18, Инструкция по эксплуатации

Страница: 10 / 12

INTENDED USE Only operate the power tool/machine for its
manual.
This power tool/machine is for domestic use only. Do not use
outdoors or on wet surfaces.
This power tool/machine is not intended for use by persons
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless supervised or given ap-
propriate instruction concerning the product’s use by a per-
son responsible for their safety.
GENERAL PRECAUTION
Do not allow to be used as a toy.
Children should be supervised to ensure they do not play with
the power tool/machine.
If the power tool/machine is not functioning properly, has
been dropped, damaged, left outdoors, or immersed in liquid,
do not use, contact DOMU Brands Customer Services.
Do not use the power tool/machine if any parts appear to be
faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoid body contact with
earthed or grounded surfaces such as pipes,radiators, ranges
and refrigerators. There is an increased risk of electric shock
if your
body is earthed or grounded.
position before connecting to the power source and/ or bat-
tery pack, picking up or carrying the tool. Carrying power tools
are switched on, invites accidents.
Do not operate power tools in explosive atmospheres such
tools create sparks which may ignite the dust or fumes.
Always wear eye protection. Any power tool can throw foreign
objects into your eyes and cause permanent eye damage. Al-
ways wear safety goggles (not glasses) that comply with ANSI
safety standard Z87.1. Every day glasses have only impact
resistant lenses.
Do not expose power tools to rain or wet conditions. Wa-
ter entering the power tools will increase the risk of electric
shock.
Stay alert, watch what you are doing and use common sense
when operating a power tool/machine. Do not use a power
drugs, alcohol or medication. A moment of inattention while
operating power tool/machine may result in serious personal
injury.
Use personal protective equipment. Always wear eye pro-
tection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce person-
al injuries.
Prevent unintentional starting. Ensure the switch is in the
pack, picking up or carrying the tool.
energizing power tool/machine that have the switch on invites
accidents.
Remove any adjusting key or spanner before turning the
power tool/machine on. A spanner or a key left attached to
a rotating part of the power tool/machine may result in per-
sonal injury.
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool/machine
in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
WORK AREA SAFETY Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tool/machine in explosive atmospheres,
Power tool/machine create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a power
tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE Do not force the
power tool/machine. Use the correct power tool/machine for
your application. The correct power tool/machine will do the
job better and safer at the rate for which it was designed.
Do not use the power tool/machine if the switch does not turn
-
trolled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery
pack from the power tool/machine before making any adjust-
ments, changing accessories, or storing power tool/machine
tools. Such preventive safety measures reduce the risk of
starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children and
do not allow persons unfamiliar with the power tool/machine
or these instructions to operate the power tool/machine.
Power tool/machines are dangerous in the hands of untrained
users.
Maintain power tool/machines. Check for misalignment or
binding of moving parts, breakage of parts and any other con-
damaged, have the power tool/machines repaired before use.
Many accidents are caused by poorly maintained power tool/
machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in ac-
cordance with these instructions, take into account the work-
ing conditions and the work to be performed.
those intended could result in a hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse elec-
trical components and or a component that has a plug at-
tached.
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing. Such preven-
tive safety measures reduce the risk of starting the power tool
accidentally.
Ensure the motor has fully stopped before cleaning, clearing
a blockage, checking, or carrying out any maintenance on the
tool.
Maintain your power tool. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
use. Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cut-
ting tools with sharp cutting edges are less likely to bind and
are easier to control.
caused by normal use has not begun to loosen them.
Store idle power tools out of reach of children and do not al-
low persons unfamiliar with the power tool or these instruc-
tions to operate the Breaker.
Locate the power tool out of reach of children, in a dry, locked
unit.
Make sure that the cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or stress.
Remove the plug from the mains socket / battery (where ap-
plicable) before carrying out any adjustment or maintenance.
Always store the power tool/machine in a dry place.
09