Netzerotools FLIR T6 Series, Руководство по началу работы

Страница: 23 / 94

EN-US EN-US English
Quick start guide Camera parts
Follow this procedure to get started right
View from the right
away:
1. Put a battery into the battery
compartment.
2. Charge the battery for 4 hours before
starting the camera for the first time,
or until the green battery condition
LED glows continuously.
3. Insert a memory card into the card
slot.
4. Push the button to turn on the
camera.
1. Knob to change the dioptric
5. Aim the camera toward the object of
correction for the viewfinder
interest.
2. Handstrap
6. Autofocus the camera by pushing the
3.
Digital zoom button
Autofocus/Save button halfway down.
4. Autofocus/Save button
7. Push the Autofocus/Save button fully
down to save an image directly.
View from the left
8. Move the image to a computer by
doing one of the following:
•
Remove the memory card and
insert it into a card reader
connected to a computer.
• Connect a computer to the camera
using a USB mini-B cable.
9. Move the image from the card or
camera, using a drag-and-drop
operation.
Note : You can also move the images to
the computer using the FLIR Tools
software, which comes with your camera.
1.
Lamp for the digital camera
2. Laser pointer
3.
Lamp for the digital camera
4. Infrared lens
5.
Digital camera
6. Focus ring
7.
Button to operate the laser pointer
23
netzerotools.com
netzerotools.com