Netzerotools FLIR M-SERIES, Руководство оператора

Страница: 30 / 74

M-Series System Startup
28
432-0003-00-10 Rev 150 — M-Series Operator’s Manual
Global Stndby?
When
Global Stndby?
is selected, all discovered cameras and JCUs found on
the network are placed in standby mode. This function is used to properly shut
down all cameras (return to stow position) and JCUs prior to removing power
with the system breaker.
Note:
Global Stndby?
displays as an option only when multiple JCUs or
cameras are found on the system.
Global standby can also be achieved by pressing and holding the SCENE,
COLOR, and HOME buttons in unison.
Calibrate JCU
Calibrate JCU
is used to standardize the movements of the JCU puck. This
function might be used, for example, if the camera responds at a different rate
when the puck is pushed left rather than right, or when the puck is twisted in one
direction compared to the other. The JCU display directs the user to move and
twist the puck in certain ways so the device can be calibrated.
After entering calibration mode, you will be instructed to move the puck to the
maximum extent possible in each direction separately. After that has been done,
pressing the puck moves to the next step. For example,
Rotate CW/CCW
requires rotating the puck clockwise to the full extent possible, and then rotating
counter clockwise to the full extent possible. When both directions are
completed, press the puck to continue.
Cancel
The
Cancel
option causes the JCU to exit the Power Menu and return to its
normal state.
Factory Default Settings
Table 3.1 shows the factory default settings for the M-Series configuration
options and the JCU buttons. Chapter 4, "M-Series System Configuration," on
page 31 describes how to modify and update settings.
TABLE 3.1
Factory Default Settings
Option Factory Default Setting
Aircraft Joystick Disabled
Ball-Down Installation Disabled (not available on M-618CS model cameras)
Camera Name Model number followed by serial number (for example,
M-618CS JD-0123)
Color Thermal Video Enabled
www.netzerotools.com
www.netzerotools.com