NetworX NX-148E, Руководство пользователя

Страница: 2 / 32

Disarming The System:
1. Simply enter your 4-digit code to disarm the system.
2. The system must be disarmed before opening any protected areas or the alarm will
activate.
Frequently Asked Questions
1. What is “System Not Ready – For Help Press Here>”?
A protected area or “Zone” is not ready to arm. Press the down arrow on the keypad to the
right of the screen to display the area or “Zone” that is not ready. If the area or “Zone”
cannot be cleared or set press the down arrow on the keypad, the screen will display the zone
that will not set. Press the “Bypass” key on the keypad to bypass the problem zone. The
balance of the system may now be armed by pressing either the “Exit” or “Stay” button.
1. What is “Service Required – Press *2 For Help”?
This display indicates there is a trouble condition with the system. If the keypad is beeping,
enter your 4-digit code. If the beeping continues, press the # key and enter your 4-digit code
again. Once the beeping has stopped, press the star (*) key and then the two (2) key. The
screen will now display the trouble with the system.
2. How do I bypass a zone?
Press the (*) key and then the up arrow on the keypad until the zone you would like to bypass
is reached. Press the “Bypass” key to bypass the zone displayed. Once the desired zone or
zones have been bypassed, press the # key to return to the normal screen. The system may
now be armed as usual.
3. How do I reset the Fire Alarm?
When the Fire Alarm is activated and the sirens are sounding, enter your 4-digit code to
silence the sirens. Search for the cause of the activation, once the cause is determined press
the (*) key then the seven (7) key. The Red fire light should go out and the Fire Alarm will
return to normal.