26
NTVCAM51 User Guide 1-0
www.networktv.tv
3
）
RTP Broadcasting
Main/Sub Stream
：
On/off
；
Protocol
：
RTP or TS
Address
：
Default
224.1.2.3. It can be edited.
Port
：
Main Stream Default Port:
4000
，
Sub Stream Default Port: 4002
）
Visit
：
Address comes up after setting. Eg.
rtp://224.1.2.3:4000
；
udp://@224.1.2.3:4000
；
3) Video Parameters
a, Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium optional)
b, Exposure: Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, wide dynamic, shutter
speed, aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture priority, brightness priority
optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value:
Set the exposure compensation value, valid when it is set for auto (default 0,-7 to 7 optional).
BLC
: Set back light compensation, valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default 50Hz, closed,60Hz
optional).
Gain limit:
set the gain limits, auto, active when it is status of aperture or brightness priority (default
3
, 0-15 optional).
Dynamic range:
set the dynamic range (default
5
, 0-8 optional).
Shutter speed:
active when it is status of manual or shutter-priority (default
1/100
，
1/25, 1/30, 1/50, 1/60m, 1/90, 1/100, 1/120,
1/180, 1/250, 1/350, 1/500, 1/1000, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000
optional).
Aperture value:
Set the aperture value, active when it is status of manual or aperture-priority (default F1.8,closed,
F11,
F9.6,
F8.0,F6.8, F5.6, F4.8, F4.0, F3.4, F2 .8, F2.4, F2.0, F1.8 optional).
Brightness:
Set the brightness value, active when it is a state of brightness priority (default 7,0-23 optional).
c, Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue gain can be set.
White balance modes:
Set the white balance mode (the default automatic, 3000K, 4000K, 5000K, 6500K, manual, One-push
optional). Note: Click the “Correction” button when selected the One-push white balance mode.
Saturation:
Set the saturation (default 80%, 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low, high, medium optional).
Chroma
: Set the chrome (default 7,0-14 optional).
Color Temperature:
set color temperature (Default setting: High, with low, middle for options)
Red Gain
: Set the red gain, effective when it is manual (default 255,0-255 optional).
Blue Gain:
Sets the Blue gain, effective when it is manual (default 199,0-255 optional).
d, Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and Vertical Flip can be set.
Brightness:
Set the brightness (default 6, 0-14 optional).
Contrast:
set the contrast (default 8, 0-14 optional).
Sharpness
: Set the sharpness value (default
7
, 0-15 optional).
Black and white mode:
Set black and white mode (default color, black/white optional).
Gamma
: Gamma value setting (default, 0.45, 0.50, 0.52, 0.55 optional).
Flip Horizontal
: Set Flip Horizontal (default Off, On optional).
Flip Vertical:
Set vertical flip (default Off, On optional).
e. Noise Reduction: 2D noise reduction, 3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction
: Set 2D noise reduction level (default Auto, 1-7 and Off optional).
3D Noise Reduction
: Set 3D noise reduction level (default
5
, 1-
8
and Off optional).
Dynamic dead pixel correction:
Set Dynamic dead pixel correction (default Off, 1-8 optional).
Note: Click “Refresh” to make revision of any video parameters of a,b,c,d,e effective .
4) Character-Overlapping
Display date and time:
Set whether to display the time and date (default display).
Display Title:
Set whether to display the title (default display).
F
ont Color of Time:
Set font color of time and date (default white, black, yellow, red, blue optional).
