AAV-HD-DMUX(-R)/ AAV-SD-DMUX(-R)
Rev. 1
Video Data rate:
270Mbps
Video frame rate:
25i and pull down 30i rates
Equalization:
Automatic up to 35dB
Impedance: 75
ohm
Return loss:
>15dB up to 1,5GHz
Signal level:
Nom. 800mV
Connector: BNC
2.4.2
Optical video input
Optical wavelength:
1200-1620nm ±40 nm
Maximum Optical power:
0 dBm HD PIN.
Minimum Optical power HD/ SD:
-24/-26 dBm with HD PIN.
Return loss:
Better than 27 dB.
Maximum reflected power:
4%
Transmission circuit fiber:
Single mode HD PIN/ (Multi-mode option on request).
Multi-mode PIN is standard with AAV-SD-DMUX
Connector: SC/UPC
2.4.3
Data inputs
RS422: 1
Connector: 8P8C
Jack
Packet mode:
Baud rates:
9600 to 115200
Data length:
7 or 8 bits
Parity:
None, odd or even
Stop bits:
1, 1.5 or 2 bits
GPI mode:
Raw data sampling frequency:
93750 Hz
2.5
Outputs
2.5.1
Electrical video output
Number of HD/SDI outputs:
1
Connector: BNC
Impedance: 75
ohm
Return loss:
> 15 dB to1.5GHz
Signal level:
nom. 800mV.
Rise/fall time:
typically 650ps. @270Mbps. < 270ps @1.485Gbps
2.5.2
Analog audio outputs
Number of outputs:
4.
Sampling frequency:
48 kHz.
Differential output impedance:
53 ohms.
Common mode output impedance: 20 kohm.
Connector (C1 backplane):
25 pin D-sub female.
Maximum signal level (0 dBFS):
+24dBu or lower in 0.5 dB steps.
Common mode voltage tolerance:
+50V, -0V
Frequency response:
20 Hz – 20 kHz +/-0.1 dB
Pass-band ripple:
+/- 0.002 dB
Stop band attenuation:
82 dB
network-electronics.com | 9
