NetX™ X-Series
Thermostat
INSTALLATION AND PROGRAMMING MANUAL
WWW.NETWORKTHERMOSTAT.COM
TABLE OF CONTENTS
Before You Start
1
Introduction
1
What is in the box?
1
Copyright Notice
1
Thermostat Callout
1
Thermostat Location
1
Mount Thermostat Backplate
1
Thermostat Setup
2
Touchscreen User Menu Settings
2
Touchscreen Installer Menu Settings
2
Touchscreen Temperature Override
2
Additional Settings and Features
2
Remote Sensors (optional)
3
Programming The Thermostat
3
Wiring Diagrams
3
Terminal Connection Callouts
3
Independent Power Source (Optional)
3
Wiring Diagram Cross Reference Chart
4
Specifications
4
FIVE (5) Year Limited Warranty
4
FCC Regulatory Information
4
BEFORE YOU START
Please read entire install manual. The thermostat will need to
be correctly wired and configured for proper operation. Basic
HVAC configuration can be performed from the thermostat
touchscreen and advanced settings are accessed via your
network and/or the Internet.
INTRODUCTION
The X-Series thermostat is a network connected color
touchscreen thermostat with an advanced remote sensor bus,
designed for new or replacement commercial or residential
applications. It supports up to 3 Heat / 2 Cool heat pumps and
2 Heat / 2 Cool conventional systems. Internal webpages help
deliver a near-effortless setup of your daily schedules (4 events
per day), and up to 40 Special and 40 Calendar Events. The
unique scheduling structure also supports the powerful
features of adjustable temporary override times, temperature
ranges, occupied and unoccupied events, keypad lockout, and
many more features.
Available in both Wi-Fi and Ethernet models, the X-Series
supports NetX CloudConnect™, DirectConnect™, and
PCConnect™ Software Tools.
Core Features
●
4 independent schedules per day
●
40 Calendar Event Schedules
●
40 Special Event Schedules
●
Integrated Humidity Sensor
●
Integrated Weather with Current Conditions & 7-Day Forecasts
●
Occupancy Sensor Input
●
14 Remote Sensors: up to 6 indoor, 1 humidity, 1 outdoor,
and up to 3 auxiliary sensors for monitoring items such as
supply air, return air, walk-in refrigerators and freezers, etc.
●
2 Digital Inputs for Fault Conditions, including Condensate
and Equipment Faults
●
Email & Text Message Alerting for 4 Recipients
●
Alerts include Hi/Lo Temps for Indoor, Outdoor, Supply,
Return, and Aux Temps, Inefficient Equipment Runs, Change
Filter Notifications, and Two Digital Inputs: 19 Alerts in All
WHAT IS IN THE BOX?
●
(1) X-Series Thermostat Faceplate
●
(1) WBM-WiFi or WBM-IP Communication Backplate
●
(2) 3/16 Drywall anchors
●
(2) Mounting Screws
●
(1) Installation Manual
COPYRIGHT NOTICE
This manual and its content is a copyright of Network
Thermostat - © Network Thermostat 2020. All rights reserved.
Any redistribution or reproduction of part or all of the contents
in any form is prohibited other than the following:
1. You may print or download for your use only
2. You may not, except with our express written permission,
distribute or commercially exploit the content, nor may you
transmit it or store it in any other website or other form of
electronic retrieval system.
THERMOSTAT CALLOUT
1
Special Status Notifications
2
Secondary Notification Icons
3
Current Equipment Mode Indicators
4
Lock, Override and Hold Icons
5
Current Operation Status Icons
6
Secondary Status Icons
7
Remote Sensor Value (humidity and temperature)
8
Remote Sensor Icons (temperature, indoor, outdoor icons)
9
Occupancy Detection Icon
10
Dot Matrix Display
11
Clock Display
12
Menu Button
13
Mode Button
14
Fan Button
15
Vacation Button
16
Resume/Cancel/Power Button
17
Day of Week Icons
18
Active Schedule Icons
19
Current Temperature Display
20
Up Button (Up Arrow)
21
Down Button (Down Arrow)
22
Back Button (Left Arrow)
23
Accept Button (Right Arrow)
THERMOSTAT LOCATION
To ensure proper operation, the thermostat should be mounted
on an inside wall in a frequently occupied area of the space. In
addition, its position must be at least 18” (46 cm) from any
outside wall, and approximately 5’ (1.5 m) above the floor in a
location with freely circulating air of an average temperature.
Be sure to avoid the following locations:
●
Behind doors or in corners where freely circulating air is
unavailable
●
Where direct sunlight or radiant heat from appliances might
affect control operation
●
On an outside wall
●
Adjacent to, or in line with, conditioned air discharge grilles,
stairwells or outside doors
●
Where its operation may be affected by steam or water
pipes or warm air stacks in an adjacent partition, or by any
unheated / uncooled area behind the thermostat
●
Where operation may be affected by lighting dimmers
●
Where operation will be affected by the supply air of an
adjacent unit
●
Near electrical source interference such as arcing relay
contacts
MOUNT THERMOSTAT BACKPLATE
BEFORE YOU BEGIN:
Turn off the power to the HVAC
equipment.
B
TIP:
If you are replacing an existing thermostat, take a
picture of the thermostat wiring for reference.
1. From the factory, the thermostat faceplate is not firmly
connected to the backplate. While holding the thermostat,
firmly near the bottom, gently pull apart the backplate from
the faceplate.
2. Place the rectangular opening in the backplate over the
equipment control wires protruding from the wall. Use the
backplate as a template and mark the location of the two
mounting holes.
A
NOTE:
There are several versions of the X-Series
thermostat. The wiring instructions for the equipment are
identical.
3. Use the supplied anchors and screws for mounting on
drywall or plaster; drill two 3/16” (5mm) diameter holes at
the marked locations; tap the nylon anchors in flush to the
wall surface and fasten backplate using the supplied screws.
C
WARNING:
Do not over tighten the screws!
4. Connect the wires from your system to the thermostat
terminals as shown in the
Wiring Diagrams
section of this
manual. Carefully dress the wires so that any excess is
pushed back into the wall cavity or junction box. Ensure that
the wires are flush to the plastic backplate. The access hole
should be sealed or stuffed to prevent drafts from affecting
the thermostat.
Reattach Faceplate
5. Reattach faceplate to backplate by placing the top of the
faceplate over the top lip of the backplate.
6. Gently swing the thermostat down and press on the bottom
center edge until it snaps in place. This is a tight connection,
but may require a little wiggle to align the pins on the
faceplate with the screw terminals on the backplate before it
snaps into place.
Page 1
240273-03
