NTI SERIMUX SERIES SSH CONSOLE SWITCH
48
Port Management
Port Configuration
The Port Configuration page is used to setup all of the criteria necessary to communicate between the user and host devices.
Figure 72- Port Configuration page
Under “Port Management” in the main menu, select “Port Configuration” to display a ports list. Click on a port to display the
current configuration settings for the selected port and the configurable setting categories.
Setting
Description
Port Settings
Various settings for port identification, type, and connection methods
Serial Settings
Define the serial settings for serial connections to communicate
Port Logging
Define characteristics of port logs and storage method
View/Clear Port Log
View log for current port and clear data if desired
Modem Settings
Apply settings required for connection to a modem
Authentication Select
authentication method for port
Event Notification
Configure to send e-mail upon connection and/or disconnection at port
and/or to send SNMP message
Port Access List
Determine which users and/or groups of users have port access
Apply Common Settings
Apply settings configured under “common settings” (page 52) to port
Disconnect Port
Disconnect port from use at any time
Port Configuration->Port Settings
Setting
Description
Port Name
This is the name of the port as it will appear in the
port list. Up to 50 characters may be used.
Port Enable
If this is set to disabled, no one will be able to
connect to the port, either as a user, or with a device
Port Type
A port can be either defined as a:
-
Host port for serial device connection
-
User port for direct user plug in
-
Dial-in user such that a modem will be connected
and a remote user can connect through a
modem
Assign IP Enable
With this enabled, an IP address can be specifically
assigned to this port. Once enabled, an additional
configuration block will appear to assign the IP
address to be used.
Figure 73- Port Settings
