7)
Alternatively, t
o
use the Ether
net
-based features
, connect as
follows:
1.Connect
E
thernet cable into ethernet port on HDBaseT splitter.
2.Connect
E
thernet cable
between Output 1 and an
E
thernet extender receiver
and Smart TV
.
Note:1.The
E
thernet function is designed for
E
thernet
-
compatible receiver units only.
2.Only
O
utput1
supports
E
thernet function.
8) Copy EDID function
Copy the EDID of the sink which connected the loop HDMI.
4) Connect 4pcs IR TX cables to the IR-TX sockets on the splitter and connect 4pcs IR RX cables
to the IR-RX sockets on the splitter.
5) Connect IR RX cable to IR-In port of Receiver, connect IR TX cable in to IR-Out port of Receiver.
6) Power up all units, the splitter,Receiver
,
sources and displays.