CWDM-1-8/-9-16/1-8-L/9-16-L/1-8-M/9-16-M
Rev.
2
3
Connections
3.1
Mounting the CWDM filter
The CWDM filter must be mounted in a Flashlink subrack. This is done from the rear of the
subrack. Do not use force when inserting the CWDM filter, once the module’s upper rail
aligns with the card rail in the subrack, it should slide easily into place. Lock it with 4
M2.5x8mm screws.
Figure 2: CWDM-1-8 mounted in a Flashlink subrack.
3.2
1-8 channel system
Connect each of the optical ports to the corresponding optical port on the receiver or
transmitter that matches the signal type and wavelength.
Figure 3: Interconnection of an 8 channel system.
Figure 4: 8-channel CWDM filter connected to main fibre
network-electronics.com | 6
