Permit other device to join
Z815B is featured to be a router in the network. It permits other devices to join the network.
In normal operation, by default the router device Z815B does not permit any device to join
to the network to protect the network from unexpected or unauthorized join attempt. You
will need to open up the permit-join manually on Z815B or on other router device to allow
new devices to join.
Operation:
1.
Short press the binding key once
.
2. The permit join is now enabled for 60 seconds and the indicator light will flash 60
times.
3. Z815B waits the new device to join in automatically. Please note that the maximum
waiting time to join is 60 seconds. Repeat the process if you missed the 60 seconds
period.
Resetting Power Consumption Summation
Z815B updates and stores the last
kwh
energy reading. In some cases user would wish to
return the counter to zero. Same feature can be found in ZiG-BUTLER software with the
Recalculate
button.
Operation:
Hold press binding key for 20 seconds or so until the indicator flashes once then release
the key, then
within 2 seconds
, short press any switch button once. If successful the
indicator will flash once.
Restore to factory setting
Z815B is capable of storing and saving includes network routing information. If you wish to
remove Z815B from an exited network, you would need to clear the saved routing
information to join to a new network by simply reset the device to restore to the factory
setting.
Operation:
Hold press binding key for 15 seconds or so until the indicator flashes once then release
the key, then
within 2 seconds
, short press any switch button once. If successful the
indicator will flash once.
Soon the device will reboot itself. In so the entire ZigBee network and required information
Z815B is capable of holding 6 routers and 14 end devices.
