Model: Z831RT
4
4. Installation and Preparation
4-1. Power supply
The Z831RT can be powered from DC 12V/5V/3V.
4-2. Join ZigBee network
(1) Power on Z831RT, it will start to search network automatically.
(2) If there are routers or coordinators on the same channel, available to connect; Z831RT will join automatically.
(3) Networking indicator flash: connection fails.
(4) Networking indicator stays on: connection completes.
4-3. Permit join
Z831RT as a router allows other devices to join the network:
(1) Short press the binding key once.
(2) Status indicator will flash which means allowing other devices to join network through Z831RT.
(3) After status indicator flashes 60 times within 60s, permit join function will shut off automatically and the
indicator stops flashing. During the screening process, short press the bond button, stop the network, the network
stop flashing
4-4. Binding
Z831RT can bind with On/Off (0x0006) Cluster ID of users’ devices; users can remote control on/off devices via
Z831RT. Binding steps as shown below:
(1) Available to bind devices with on/off functions such as Z501, Z503, ZB02C...etc.
(2) Long press binding key for 3 seconds; the status indicator will flash once.
(3) Release binding key and short press it for N times in order to bind the Nth channel; each short press
corresponds to a flash of status indicator.
(4) For example, to bind 1st channel with other devices. Press binding key for 3 seconds; status indicator will flash
once. Release binding key and short press it once and see a flash within 5 seconds. Z831RT will send binding
request to devices. Operate other devices to send binding inquiry as well to bind with Z831RT.
(5) Status indicator will flash 5 times and then shut off when binding completes. .
(6) Status indicator will flash 10 times and then shut off when binding fails.
