5
4.2 Permit join
Z806 acts as a router and allows other devices to join the network. Turn on permit join function:
press shortly binding key, status indicator flashes to show permitting join. Other devices are allowed
to join network through Z806, permitting interval 60 seconds; the network indicator will flash 60
times. Z806 will shut down permitting function after 60 seconds and the status indicator stops
flashing.
4.3 Binding
Z806 can bind with devices of client side carrying On/Off (0x0006) Cluster ID. Z806 can
receive on/off command and
perform the corresponding on/off switching
Binding operation are as below:
Objects can be bound : switching devices as Z501, Z503, ZB02C, etc.
Binding operations: press and hold binding key for 3 seconds, after the status indicator flashes once,
release the key bindings, within 5 seconds press binding key N times to choose Nth channel to be
bound. Each time you press the key; the status light flashes once to show prompted key is valid. For
example , channel 2 to bind with other devices, press and hold binding key for 3 seconds, then the
status indicator blinks once, release binding key. Within 5 seconds continuously press the binding
key 2 times, the status light flashes twice individually to show each prompted key is valid . 5
seconds later, Z806 will send a binding request. Operate devices to be bound to also send a binding
request. After binding is successful, Z806 status indicator blinks 5 times. Status indicator will flash
10 times to show that binding is not successful.
NOTE: The device supports 32 groups , 32 scenes.
4.4 Control
Devices which are bound with Z806 can send on/off command to Z06.
When Z806 receives the ON command, relay magnet of the corresponding channel will connect;
thereby the external circuit of that channel is turned on. When Z806 receives OFF command, relay
magnet will disconnect, so the external circuit cut off.