background image

 

 

4.Set up Instruction 

On/Off 

 

Power on 

Open the upper cover and insert 2 AAA 1.5V batteries   

(You may use tools to open the upper cover, such as a screwdriver) 

Turn on   

Press the function key till seeing one green indicator flash and one red indicator flash.   

Turn off   

(Restore to factory setting) 

Press and hold the function key for 5 seconds till green indicator light flashes for 20 times. 

Power off 

Remove Batteries.   

Note 

1.

 

The device will be off after removing the battery and insert it again. 

2.

 

It is suggested to wait for at least 10 seconds between turning the device on and off. 

3.

 

To enter the engineering test mode: keep pressing the function key and then insert the batteries   

Network Joining

 

 

If the device has never joined 

the network 

Turn on the device, and it will search for the network to join. 

The green indicator light stays on for 5 seconds: joins the network successfully 

The green indicator light remains off: fail to join the network 

If the device has joined the 

network and it is not set to 

default 

Turn on the device, and it will search for the previous network to join. 

The green indicator light stays on for 5 seconds: joins the network successfully 

The green indicator light remains off: fail to join the network 

If the device fails to join the 

network   

(when the device is turned 

on) 

For the first two minutes: the device will wake up every 15 seconds to send a join request. 

After two minutes: the device will enter sleep mode and wake up every 15 minutes to send a join 

request. 

Note: It is suggested to remove the batteries if the device is not in use to save power.   

     It is suggested to check the device verification information on the gateway   

     or consult your platform server provider when the device fails to join the network. 

Function Key

 

 

Press the function key and 

hold the pressing for 5 

seconds 

The device will be set to default and turned off 

The green indicator light flashes for 20 times: success 

The green indicator light remains off: fail 

Press the function key once   

The device is in the network: green indicator light flashes once and sends a report 

The device is not in the network: green indicator light remains off 

Press the emergency button 

The device is in the network: red indicator light flashes once and sends an alarm report 

The device is not in the network: red indicator light remains off 

Note: The report interval can be adjusted; please refer to the command 

ConfigButtonPressTime 

 

Содержание RB02I













Отзывы: