6
5. Data Report
Example of ConfigureCmd
FPort
：
0x07
Bytes
1
1
Var(Fix =9 Bytes)
CmdID
DeviceType
NetvoxPayLoadData
CmdID
– 1 bytes
DeviceType
– 1 byte – Device Type of Device
NetvoxPayLoadData
– var bytes (Max=9bytes)
Off
R831D
0x90
0XB0
Channel(1Bytes)
bit0_relay1,
bit1_relay2,
bit2_relay3,
bit3_bit7:reserved
Reserved
(8ytes,Fixed 0x00)
On
0x91
Channel(1Bytes)
Reserved
The device will immediately send a version packet report along with an uplink packet including 3 relay status and 3 input status.
The device sends data in the default configuration before any configuration is done.
Default setting:
MaxTime: Max Interval = 900s
MinTime: Min Interval = 2s
Note:
The device report interval will be programmed based on the default firmware which may vary.
The interval between two reports must be the minimum time.
Please refer Netvox
LoRaWAN Application Command document
and
Netvox Lora Command Resolver
