6
Operations:
1. Press and hold both function keys for 5 seconds till the green indicator flashes and then release;
LED flashes quickly 20 times.
2. The R727 restarts automatically to re-join to a new network.
Note. Restore factory settings, ACK is off mode by default; ADR is on mode by default;
6. Installation
(1) In the position to be installed, loosen the U-shaped screw at the bottom of the R727 device and
the mating washer nut, and fix the U-shaped screw through the appropriate size cylinder on the fixed
post piece of R727. Fit the shim nut and lock nut in order till R727 device body is not stable shaken.
(2) Loosen the M5 nut on the bottom of the R727 device cover and remove the cover together with
the screw.
