background image

 

 

1.

 

Introduction   

R718PQ is a long-range Wireless Short-Range Occupancy Sensor for Netvox Class A type devices based on LoRaWAN open protocol. 

If there is to be a person or animal movement detected by the R718PQ within the monitoring area, the device reports the detected status to gateway. 

 

LoRa Wireless Technology: 

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, 

LoRa spread spectrum modulation method greatly increases to expand  the communication distance. Widely used in long-distance, low-data wireless 

communications.  For example,  automatic meter reading, building automation equipment, wireless security systems, industrial monitoring. Main 

features include small size, low power consumption, transmission distance, anti-interference ability and so on. 

 

LoRaWAN: 

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways from different 

manufacturers.   

2. Appearance

 

                             

   

 
 
 
 
 
 
 
 
 
 

 

 
 

R718PQ 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

PIR 

Function Key 

Indicator 

Содержание R718PQ










Отзывы: