7
6.
Installation
2. R718PA5 regularly reports data that is NO2
concentration according to MaxTime.
The default Max Time is 3 min.
Note:
MaxTime can be modified by the downlink command,
but it is recommended not to set the interval too short.
R718PA5 can be applied to the scene of detecting the
NO2 concentration.
Example:
Underground parking lot
Environmental protection monitoring
1.
R718PA5 has the built-in magnet (as the figure below)
which can be attached to the surface of an iron object during
installation, which is convenient and quick.
In order to make the installation firmer, please use screws
(purchased separately) to fix the device to the wall or other
surface (as Figure below).
NO2 Sensor is fixed by screws that needs two screws
(purchased separately) in the middle.
Note:
Do not install the device in a metal shielded box or in an
environment surrounded by other electrical equipment to
avoid affecting the wireless transmission of the device.
NO2 Sensor
Adapter 12V
Socket
Screw Fixation
Housing Screw
Screw Fixation
Screw Fixation
