8
6. Installation
This product comes with waterproof function.
When using it, the back of it can be adsorbed on the iron surface, or the two ends can be fixed to the wall with screws.
1. The Wireless 2-Gang Resistance Temperature Detector
(R718B2) has a built-in magnet (see Figure 1 below). When
installed, it can be attached to the surface of an object with
iron which is convenient and quick.
To make the installation more secure, use screws (purchased)
to secure the unit to a wall or other surface (see Figure 2
below).
Note:
Do not install the device in a metal shielded box or in an
environment with other electrical equipment around it to
avoid affecting the wireless transmission of the device.
R718B2 is suitable below scenarios:
Oven
Industrial control equipment
Semiconductor industry
2. When R718B2 is compared with the last reported
values, the temperature change is exceeded 0.1°C
(default),it will report values at the MinTime interval;
If does not exceeded 0.1°C (default) ,it will report values
at the MaxTime interval;
Temperature probe
