10
6. Installation
This product has its own waterproof function. When in use, its back can be adsorbed on the iron surface, or its two ends can be fixed on
the wall with screws.
1.The Wireless Temperature and Humidity Sensor (R718A01) has a built-in magnet (see Figure 1 below). When installed, it can
be attached to the surface of an object with iron which is convenient and quick.
To make the installation more secure, use screws (purchased) to secure the unit to a wall or other surface (see Figure 2 below).
Note:
Do not install the device in a metal shielded box or in an environment with other electrical equipment around it to avoid
affecting the wireless transmission of the device.
2. When the temperature and humidity detected by R718A01 is compared with the last reported values, it will report current
values when the temperature change exceed 1°C (default) or the humidity change exceed 1%(default).
3. Installation height recommendation:1-2 m
4. Installation ambient temperature: -40C° ~ 55°C
5. Installation direction recommendation: The output port (sensor) is facing down, and the LOGO is facing towards the person.
The figure shows the scene where the temperature and humidity sensor (R718A01) is applied in the refrigerator.
It can also be applied to the following scenarios:
⚫
Restaurant (refrigerator or freezer)
⚫
Shopping mall supermarket (freezer)
⚫
Engine room
⚫
Environmental monitoring
⚫
Smart city and intelligent building
⚫
Storage and transportation of food and medicine
⚫
Flowers and other perishable foods
⚫
Wall or logistics refrigerator
When it is necessary to detect temperature or humidity.