8
Notes:
(1)
The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not
collect data.
(2)
The collected data is compared with the last reported data. If the variation of the data is greater than the value of
ReportableChange, the device will report according to MinTime interval. If the data variation is not greater than the last
reported data, the device will report according to MaxTime interval.
(3)
We do not recommend setting the MinTime Interval value too low. If the MinTime Interval is too low, the device will wake
up frequently and the battery will be drained soon.
(4)
When the device sends a report, no matter the data changes, button is pushed or MaxTime interval comes, another cycle of
MinTime / MaxTime calculation starts.
6. Installation
(1) The device does not have a waterproof function. After the configuration of joining the network is completed,
please place it indoors.
(2) The dust at the installation location should be wiped clean before paste the device.
(3) The battery installation method is as the figure below. (the battery with the "+" side facing up)
Note:
The user may need a screwdriver to open the cover.
