4
4.Set up Instruction
On/Off
Power on
Insert batteries. (users may need a screwdriver to open);
Insert two sections of 3V CR2450 button batteries and close the battery cover.)
Turn on
Press any function key till the green and red indicator flash once.
Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till the green indicator flashes for 20 times.
Power off
Remove Batteries.
Note:
1.
Remove and insert the battery; the device memorizes previous on/off state by default.
2.
On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
3.
Press any function key and insert batteries at the same time; it will enter engineer testing
mode.
Network Joining
Never joined the network
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
Suggest to check the device verification information on the gateway or consult your platform
server provider.
Function Key
Press and hold for 5 seconds
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: the green indicator flashes once and sends a report
The device is not in the network: the green indicator remains off
Sleeping Mode
The device is on and in the
network
Sleeping period: Min Interval.
When the reportchange exceeds setting value or the state changes: send a data report according
to Min Interval.
Low Voltage Warning
Low Voltage
2.4V
