Professional 8x6+2 Matrix using Gen. 2 HDBaseT transmission technology
delivering 4K/60 4:4:4 HDR capability over a dedicated single cable
infrastructure or full 18Gbps pure HDMI outputs. The HT2-0806 includes a host
of free-on-board features including onboard scaling, audio distribution both
40m & 70m output capabilities as well as compatibility with Netvio's 360
embedded configuration utility and Netvio GO end-user full spectrum AV
control applications.
Quick Start Guide
Thank you for purchasing this Netvio product. The quick-start-guide is
designed to provide all required information to install your product
successfully, ensuring correct installation standards, therefore guaranteeing
performance in accordance with published features and specifications. Netvio
therefore greatly appreciates your time in reviewing the provided information
and following our recommended guidelines.
MX-HT2-0806-10
Before starting the installation, we recommend that you
download the Netvio 360 utility software from
www.netvio.co.uk. This provides easy configuration of the HT2
matrix. In addition, 360 provides the gateway to the Netvio GO
AV control application for Apple and Android devices. You will
require the product serial & product part number as a part of
the software validation process.
Safety Information
Attempts to remove product casings could result in electrical shock. Please do not attempt
to repair the device. In the event of product service requirements, please contact Netvio Ltd
or an authorised reseller for service procedures. Any unauthorised attempt to repair the
product or attempts to replace components with non-approved parts will invalidate the
product warranty. For full warranty conditions, please visit www.netvio.co.uk
Important Installation Guidelines
Prior to configuration, please ensure the matrix is properly seated on a flat, secure surface or housed in a suitable rack mount
with ample space for airflow and heat dissipation. Avoid direct contact with sources of heat such as heating systems or audio
amplifiers. Operating environment should not exceed stipulations of 0°C / +40°C | 20% - 90% RH
A suitable wired or wireless network with a router supporting DHCP (Dynamic Host Configuration Protocol ) is required where
both Matrix and computer are connected to the same network.
If a suitable router or DHCP server is not available, a direct network connection between computer and Matrix is supported, with
both computer and Matrix set to auto assign IP addresses, where Netvio360 will discover the device and guide you through the
set-up.
In the box
1no. Netvio matrix device.
1set Regionalised IEC power lead.
1 pair of 19" mounting brackets
8no. IR emitters
6no. IR receivers
6no. IR to IR cables
8no. 3-Pin serial connectors
1no RS-232 connection cable
1no master remote
3-year standards parts & labour
warranty.
Additional 2-years subject to online
registration within 90-days of
installation.
Safeguard 10-Year | 10% option
available.
Full warranty terms & conditions &
online registration available at
www.netvio.co.uk
Warranty
Drivers available at www.netvio.co.uk
2
