NetUP Streamer HD v2 8-24x. User manual
10
Parameters →
TS Config
Use the
TS Config
page to
configure the TS output parameters
and select one of the following tabs:
Stream Select, General
or
PID Bypass
.
Stream Select
Select the
Stream Select
tab to select streams that should be sent to Mux out and to modify program
info (Figure
-4).
Figure-4
Configure
input and output streams with following buttons:
add an input channel
delete an input channel
edit an input channel
delete all input channels
Lose / Locked
input signal lock. Green means signal is present
Normal / Overflow
TS overflow status. Red means that TS is overflowing and
you need to decrease number of channels
CA Filter
filter or
not filter the source CA information
PID Remap
enable or disable PID
remapping
Refresh input / output
refresh an input or an output
===> / <===
move programs between the input and the output areas
All input / output
select all input or output programs
Parse program
parse programs with a time limit
Input area
Output area
