1.
Factory Default Settings
Scan the "Enter/Exit Setting" code firstly, and then scan the "Factory Default Settings" code, after that scan
the "Enter/Exit Setting"code again to exit the setting mode.
Enter/Exit Setting
Factory Default Settings
Note:
Factory Default Settings will not change the interface setting. For example, if the interface setting of a
scanner is USB Keyboard mode, after the factory default setting, the interface mode will be still USB keyboard
not other modes.
2. Read the Version Number
Read the Version Number
3. USB Interface Setting
When connect the scanner with USB interface, the scanner could be setting as USB keyboard or USB
COM interface. The default USB interface mode is USB keyboard, if need to set to other mode, scan the setting
code as below:
(1) USB keyboard mode
Scan the USB Keyboard setting code to set the interface as USB keyboard.
USB Keyboard
(2) USB Com mode
Supporting by the applications on PC, the interface mode of scanner could be set as USB Com mode.
When Set the scanner as USB Com mode, the USB virtual serial driver need to be installed in PC.
