12
My-Netti.com
Model:
Netti DYNAMIC leg support
Language:
English
Version:
2021-03
5.2
CALF SUPPORT DEPTH
ADJUSTMENT
•
Loosen the M8 screw holding the calf
pad on the calf pad arm
•
2 pc 13 mm spanner and
•
Slide the calf pad in or out to desired
depth – the calf pad barely touching the calf
while the feet are standing on the middle of the
foot board.
They should in addition to supporting the calf also
help prevent the feet sliding backwards from the
footboard.
5.3
LOCKING THE NETTI DYNAMIC
DUAL LEG SUPPORT
The red knobs allow locking the
dynamic elevation of the leg support
plate.
For the dynamic use of the Netti Dynamic
System (OK-C) this should be kept loose to
allow for the knee joint to move
(“OK-C movement” for the knee joint).
Locking the leg support may be required if
sudden extension maylead the leg supports
to hit persons or surrounding.
It is also required if the wheelchair is being
used as a seat in a car. .
