14
My-Netti.com
Model:
Netti 4U CE PLUS / CES PLUS
Language:
English
Version:
2022-03
6.2
MAIN WHEEL
To mount the main wheel remove the quick release
bolt from the hub bushing.Lead it through thecentre
of the main wheel and into the hub bushing while
pressing the knob in centre.
To check that the main wheel is properly
attached to the hub, remove the finger from
the central knob and pull at the main wheel.
If the main wheel doesn’t lock, do not use the
wheelchair but contact your dealer.
Sand and sea water (salt used for gritting in
the winter) can damage the bearings of the
main wheels and front castors. Clean the
wheelchair thoroughly after exposure.
For information about adapting the
wheelchair to the user, please see:
My-Netti.com Knowledge center.
Tools needed are described under each chapter.
Accessories described in chapter 5 is a presentation
of options and will be delivered with separate
mounting descriptions.
6.1
UNPACKING
1. Unpack all the parts, and check that
everything is there according to the
packing list.
2. Mount the main wheels (Chapter 6.2).
3. Mount the front castors (Chapter 6.3).
4. Check and adjust the seat depth (Chap. 6.7).
5. Mount the backrest (Chapter 6.5).
6. Mount the arm supports (Chapter 6.12).
7. Mount the seat cushion (Chapter 6.9).
8. Mount the leg supports (Chapter 6.10).
9. Mount the head support (Chapter 6.11).
10. Mount any accessories (Chapter 5).
Weight of components (450 mm chair width):
Main wheels:
1,9 kg each
Anti-tip:
0,1 kg each
Front castors:
0,8 kg each
Leg support angle adj.:
2 kg each
Netti Seat cushion:
1,0 kg
Head support A:
1,0 kg
Head support C:
0,9 kg
6. ASSEMBLING AND ADJUSTMENT