NetterVibration AP 117, Руководство по эксплуатации

Страница: 14 / 16

14
Function “cascade / interval / pulse mode”
IMPORTANT
The adjustment of the duty and pause time is carried out in the same way
as in the function “standard”.
Adjusting the clock duty time:
•
If the timer is switched off, the out-
puts (terminals 4-5) are de-
energized.
•
Touch the key ON/OFF until
the displays are illuminated. The
electronic timer starts immediately
with the stored time values.
•
Touch the key until two addi-
tional illuminated points appear in
the display (adjusting mode). The
cascade adjusting mode is indicated
by the “P” preceding the value. The
outputs (terminals 4-5) are de-
energized.
•
Touch the key .
•
To increase or decrease the time
value actuate or (do not
touch RUN).
•
If the required clock duty time has
been adjusted, it must be confirmed
by touching again the key (for
at least 3 seconds).
•
The values are stored when the
points have extinguished.
•
The outputs (terminals 4-5) are en-
ergized while the clock duty time is
running.
Adjusting the clock pause time:
•
If the timer is switched off, the out-
puts (terminals 4-5) are de-
energized.
•
Touch the key ON/OFF until
the displays are illuminated. The
electronic timer starts immediately
with the stored time values.
•
Touch the key until two addi-
tional illuminated points appear in
the display (adjusting mode). The
cascade adjusting mode is indicated
by the “P” preceding the value. The
outputs (terminals 4-5) are de-
energized.
•
Touch the key .
•
To increase or decrease the time
value actuate or (do not
touch PAUSE).
•
If the required clock pause time has
been adjusted, it must be confirmed
by touching again the key (for
at least 3 seconds).
•
The values are stored when the
points have extinguished.
•
The outputs (terminals 4-5) are de-
energized while the clock pause time
is running.