Operating the Product
Open/Short Circuit Protection
If an open circuit fault of the temperature sensor exists, the ‘1h’
indicator light will flash and the buzzer will produce 10 long rings.
If a short circuit fault of the temperature sensor exists, the ‘2h’
indicator light will flash and the buzzer will produce 10 long rings.
High Temperature Protection
When the environment temperature is higher than 50°C, the
product will stop outputting power. The ‘1h’, ‘2h’ and ‘4h’ indicator
lights will flash and the buzzer will produce 10 long rings. You will
not be able to press any buttons. When the environment
temperature lowers to below 50°C, high temperature protection
mode can only be cancelled after powering off.
Tip-Over Protection
When the product is at an angle, the ‘1h’ and ‘2h’ indicator light
will flash and the buzzer will ring 10 times. The product will shut
down automatically. After the product has been stood up right,
the ON/OFF button will need to be pressed before the machine
resumes normal operation.
Eco Energy-Saving Function
The default temperature setting is 24°C when this mode is
selected. The heating output will automatically set itself based on
the environment temperature and the temperature setting
selected.