Blade pendulum action adjustment
It is possible to adjust the blade pendulum action in the range from 0 to
3. At "0", the blade will not perform additional pendulum action forward,
which allows for easier cutting. At "3", the pendulum action will be the
highest. Adjust the blade pendulum action depending on the hardness
of the material being sawed. You can cut soft materials more
aggressively by setting the blade pendulum action
adjuster to "3".
Installation of the parallel guide
.
WARNING!
Before assembly or installation of
accessories to make sure that the
tool is switched off and unplugged.
1. For repeated, equal to the cutting width of
150mm, you can use
the parallel guide (16) with the centimeter
scale. It will provide fast performance, even
and clean cut.
2.The rip fence mounted in a rectangular
opening on the side of the base stop downward. Push the guide to the
desired position defining an adequate cutting width as in the picture
above. Tighten the alien screws using the Allen wrench included with
the kit to secure the track in place.
