netsys NVF-2400S Скачать руководство пользователя

Страница: 163 / 164

NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8

162

Warranty

The original owner that the product delivered in this package will be free from defects in material and workmanship for one

year parts after purchase.

There will be a minimal charge to replace consumable components, such as fuses, power transformers, and mechanical

cooling devices. The warranty will not apply to any products which have been subjected to any misuse, neglect or

accidental damage, or which contain defects which are in any way attributable to improper installation or to alteration or

repairs made or performed by any person not under control of the original owner.

The above warranty is in lieu of any other warranty, whether express, implied, or statutory, including but not limited to any

warranty of merchantability, fitness for a particular purpose, or any warranty arising out of any proposal, specification, or

sample. We shall not be liable for incidental or consequential damages. We neither assume nor authorize any person to

assume for it any other liability.

WARNING:

DO NOT TEAR OFF OR REMOVE THE WARRANTY STICKER AS SHOWN, OR THE WARRANTY IS VOID.

Содержание NVF-2400S





































































































































































Результаты поиска

Содержание NVF-2400S

Отзывы:

Похожие инструкции для NVF-2400S

Бренды по названию

Популярные бренды

netsys NVF-2400S, Руководство пользователя

Результаты поиска

Содержание NVF-2400S

Отзывы:

Похожие инструкции для NVF-2400S

Бренды по названию

Популярные бренды