netsys G.SHDSL.bis 3010E, Руководство пользователя

Страница: 63 / 105

3010E/3020E/3040E G.SHDSL.bis EFM Bridge Modem User’s Manual Ver:A2
63
Ctrl + C To quit the configuring item.
Ctrl + Q For help
For serial console and Telnet management, the EFM Modem implements the menu driven interface. It can
show you all of available commands for you to select. You don’t need to remember the command syntax and
save your time on typing the whole command line.
The following figure gives you an example of the menu driven interface. In the menu, you scroll up/down by
pressing key I / K ; select one command by key L, and go back to a higher level of menu by key J ; you also
can scroll to top/bottom by pressing Key U/O.
For example, to show the system information, just logon to the EFM Modem, move down the cursor by
pressing key K twice and select “show” command by key L, you shall see a submenu and select “system”
command in this submenu, then the system will show you the general information.
You can press the Enter key for select command same as key L.