background image

2.

  Package Checklist

1. 

 Overview

3.

  Panel Layout

NR710C

Before  the  installation  of  the  unit,  verify  the  items  below  are 
included in the package.

1. Power switch button
    

Note: to power on/off NR710C, press the power switch button for two seconds

2. Buzzer mute button
3. Enclosure power LED

      

White – Power On

4. Fan LED

      

Green – Normal

      

Red – Failure (low frequency of RPM or stop)

5. Temperature LED

      

Green – Normal

      

Red – Overheated (higher than 50°C)

6. LCD display
7. LCD control keypad
8. Drive presence LED

      

White – Power On

9. Activity indicator LED 

      

Blue – Hard disk drive ready

      

Flash Blue – Access

      

Flash Pink – Rebuilding

10. USB 3.0 connector
11. eSATA connector
12. FireWire 800 connectors
13. Switch turned to number 0 or 1 (default) – 

          

volume larger than 2 TB

      Switch turned to number 2 – 

volume under 2 TB

External 5-bay USB 3.0, eSATA, FireWire 800 interfaces to SATA RAID Subsystem

4.

  

Enclosure Setup

1. Remove the NR710C from its packaging, and place the 

    enclosure next to laptop, desktop PC, server, or workstation.

2. Hold one of the drive trays from the enclosure and push its 

    button leftward for the release of the lever until the lever 

    emerges.

3. Place a drive tray on a flat and level surface, and then attach 

    the hard disk drive into the drive tray.

Key for HDD tray x 2

E

Hard disk drive mounting 
screw x 20

D

USB 3.0 data cable x 1

F

FireWire 800 data cable x 1

H

eSATA data cable x 1

G

HDD tray 
(installed in the NR710C) x 5

B

CD containing user manual 
and GUI x 1

C

Enclosure x 1

A

If any of the items listed above is missing or damaged, please 
contact the sales representative.

WARNING: 
You must verify the heads of the four screws are level with the drive 
tray while the trays are attached to the hard disk drives; otherwise, 
a screw could take hold of the tray from the bottom side and prevent 
you to pull the drive tray out of the array.

4. Adopt four of the screws provided, and fasten the tray on the 

    hard disk drive. Tighten each screw to fasten the drive tray 

    snugly to the hard disk drive. Do not tighten the screws overly.

The NR710C is an external 5-drive SATA disk array storage system, 
which is fast and cost effective as well as providing high-capacity 
RAID solution for SOHO, SMBs (small and medium businesses), 
and professionals engaging in video editing, content creation and 
various areas. The NR710C features built-in hardware RAID 
protection, high transmission rate, and easy setup of the enclosure. 
The connection between the NR710C and the host is simply made 
by one data cable, compatible with Windows, Mac, and Linux 
operating system.

14. Swappable fan
15. Power cord receptacle

If you want to use volume larger than 2 TB, the switch on the 
rear of the NR710C enclosure should be turned to number 0 or 1, 
and the operating system and the hardware should also support 
volume larger than 2 TB. If you want to use volume under 2 TB, 
the switch should be turned to number 2.

Volume larger than 2 TB

Volume under 2 TB

10

2

5

3 4

11 12

14

15

1

13

6

7

8
9

Отзывы: