3. INSTAllATION
The installation and maintenance instructions described in the
following pages are also detailed on the DVD included.
Our installation and maintenance videos are also available on
our website www.netspa.eu.
3.2. RCD test
1. Insert the plug into the
power outlet.
2. Press the «RESET» button,
the indicator light turns red.
3. Press the «TEST» button,
the indicator light turns off.
4. Press the «RESET» button,
the indicator light turns red.
The RCD works properly.
3.1. Site selection
Clean the place
A level place
A place with an awning
WARNING :
Before proceed to installation your spa, please make sure that the future
location meets the following conditions :
•
A level place
•
Wide enough to support the pool and its pump unit.
•
Able to support more than 500 kg/m².
•
Sheltered from the sun and bad weather.
•
Clean and free from sharp objects.
WARNING: The RCD plug must be tested before each use..
Do not use if RCD test fails and see chapter 6.1.
6
